House Waterproofing Woes: Unraveling Major Problems and Effective Solutions

House Waterproofing Woes: Unraveling Major Problems and Effective Solutions

While constructing a house, the problem of fine cracks in the roof and outer walls of the house arises due to inadequate seam sealing in the bonding of bricks, improper or lack of waterproofing in applying tiles, etc. during rainy season water seepage or dampness caused by heavy rainfall and humidity in the air. Due to weather conditions Moisture remains in the upper roof, terrace, upper floor ceiling, and outer walls of the house. This is the most common reason for fine cracks in the ceiling, especially around the corners. Due to the seepage of rainwater in these cracks, there is a problem of moisture or seepage of water from the ceiling of rooms.

The solution to these problems is possible with waterproofing.

Let us see the problem and solution of waterproofing for protection against water leakage/dampness in various parts of the house.

What is waterproofing?

The process of making the structure of a building waterproof by using chemical compounds is called waterproofing.' It is the only solution to keep the roofs, walls, balconies, basements of the building moisture-free, and water leakage. waterproofing not only protects interiors from damage but also strengthens the structure of the house.

The product and method of waterproofing are selected based on the surface of the water leak in the building and the severity of the problem.

Types of waterproofing

Waterproofing is done in two ways:

  • Concrete is prepared by mixing chemical waterproofing materials like Dr. Fixit LW, Asian Paints, Nerolac Parma, Choksi, Durabuild with cement while building a house.
  • Waterproofing fluid is used to fill cracks in the roof and walls of old buildings.

Waterproofing Solution based on the Problem

Waterproofing is necessary for all those parts of the building, from where there is a possibility of water leakage, especially the surface under the floor of the building, most of the moisture-retaining places like - balcony, bathroom, kitchen, roof, exterior wall, concrete The lower surface of the water tank above the built-up roof, etc. Let us see the solution based on the problem of waterproofing in the house.

Injection Grouting Waterproofing

The injection grouting method is adopted for waterproofing the old roof of the house, basement, bathroom, kitchen, etc. In this method, high-pressure waterproofing chemicals are used to fill the cracks in the concrete.

Membrane Waterproofing

This method is used for waterproofing a 2-3 mm thick surface like the roof of a house.

Cementation WaterProofing

This method is mainly used for the waterproofing of floors.

Bentonite waterproofing

This method is used for waterproofing the exterior wall of the house. In this, bentonite clay waterproofing chemical is used.

Liquid waterproofing

This type of waterproofing product/chemical is used for mixing with paints. It is used to fill the cracks lying in the new roofs, outer walls of the house.

Interior & Exterior Sealant

Interior and exterior sealants can be used to seal almost anything, including doors, visors, roof waterproofing, terrace waterproofing, windows, and countertops, etc.

1,165 View(s)

More Related Posts: