'The process of making the structure of a building waterproof by using chemical compounds is called waterproofing.' It is the only solution to keep the roofs, walls, balconies, and basements of the building moisture-free and water leakage. Waterproofing not only protects the interior from damage but also strengthens the structure of the house. The product and method of waterproofing are selected based on the surface of the water leak in the building and the severity of the problem.
In this step, preparation for waterproofing by cleaning the particles of plaster material trapped between the cracks on the surface of the roof and terrace of the house. There after, leave to dry after filling with good quality Home Shield Crack Fill or two coatings of powder or as required material to fill the fine cracks. Use a mixture of polymer-modified mortar with Home Shield Advanced Latex Plus to fill in large cracks and leave to dry. Then, complete the waterproofing process by covering the roof and terrace with the help of high-quality Exterior Waterproofing Roof Guard Coating.
In the third step, repair the cracks by applying two coatings of a polymer modified mortar such as Home Shield Latex waterproofing material to fill up the break-ups on all types of concrete surfaces. Then plaster the concrete surface with plaster material prepared by mixing Advanced Latex Plus waterproofing material with cement, sand, and water.
Before painting the surface of the house in the fourth and last step, the waterproofing specialist determines the moisture by using a moisture test meter. After this, the treatment technique is used depending on the moisture content, mild, moderate, or severe. For example, in case of mild moisture, the surface should be washed with a wired brush and water. Then two by two coatings of waterproof putty and two coatings of high-quality silicone and emulsion additives are used on the surface. This process helps to make the surface water, alkali, and salt resistant. To protect the plastered surface from moderate or severe moisture three coatings of polymer-modified cement-based material, two coatings of waterproofing material, and two coatings of additive material needs to be done. Before painting a new or old house, it is necessary to use the above four waterproofing steps. Although the work of waterproofing should be given priority during the construction of the new house, by taking such a decision, your home will remain new for years.
It is just like other paints. The epoxy paints can be used for indoor or outdoor jobs but then it is most relevant for indoor floor covering jobs. There is a reason behind it that when dry, epoxy paint becomes a hard, durable surface, making it the perfect choice for an indoor floor covering. But then as we all know there are no such products that have only the positive side. Every product has a drawback also. In the case of epoxy paints, the biggest drawback is that the paint contains slightly toxic fumes and is difficult for the average person to paint with. Also, if mistakes are made, or the paint surface does not dry flat and smooth, it can be extremely difficult and expensive to correct.The place where this epoxy paint is mostly used is basically the repair shops or the garages. There is a reason for that. Epoxy paint is extremely strong and impact-resistant, meaning it won't fracture, crack, or split if items are dropped or driven over the surface.
During the construction of a new house, cracks break-up due to masonry errors in plastered areas like walls and ceilings. This type of mistake is common. These cracks later cause moisture to seep into the roof, wall joints, or ceiling surface of the home. Due to this, despite getting expensive paint, the house has to face the problem of fungus and paint scabs. Therefore, to avoid these problems, it is necessary to get waterproofing done during the construction of the house. Let us see the step-by-step waterproofing process of new and old homes. In the process of waterproofing during the construction of the house, a mixture prepared from the appropriate proportions of cement, sand, and waterproofing compounds is used. This mixture is used for plastering all brickwork and cement works, pillars and foundations, roof slabs, renderings, basements, etc. This helps to firmly fill the cracks left during plastering.
Painters (Pappu) and supervisor (Pappu) have done good job. They are very patient, polite, understand requirement and completed job well. Work was neat and clean
The company has done a good job and Mr Guddu and his team has done a good job. Well done
They did an amazing job and very sipportive during the whole painting process…they also cleaned up the whole stains and also covered every thing before starting the paint job
Folks did a great job! Completed everything as promised, on time and right budget. Current team in Hyderabad is awesome and will recommend for anyone planning.
I liked the way they have taken up their work. They were very particular about all the small things and kept the house clean. I was worried about the furniture...they took good care of everything. Thank you ColourDrive for your support. Much appreciated.
Dr.Fixit Raincoat is a new product launched by Dr. Fixit brand. It is a Waterproofing material which is mainly used for Exterior walls. It gives twice thickness to walls as compare to normal paints. Patches can be hided easily by this Waterproofing material and it gives an enhanced look to whole house.Calculate Painting Cost
Smartcare Damp Proof Ultra is a water proofing material introduced by Asian Paint. It reduces surface temperature upto 10%. It gives excellent durability and bind cracks as well.Calculate Painting Cost
Smartcare Tile Grout is another grouting material by Asian paint which is Epoxy based. It is basically used for parking areas and roof tops. It is available in 26 different shades so you can choose any according to your tiles colour and design. It's durability is much longer than other products.Calculate Painting Cost
Smartcare Tile Grout is grouting material whic is used to fill up the gapes between tiles in house. It is interior product and cement based. Smartcare Tile Grout is available in different colours so you can choose it according to your tiles colour. Earlier people couldn't have any other option except white cement but now a days lots of options are available.Calculate Painting Cost
Smartcare Damp Block is a water proofing material. It can easily avoid small cracks. It makes excellent bond with material like cement. Smartcare Damp Block forms special kind of crystals in plaster that blocks path of water.Calculate Painting Cost
Waterproofing is very important as it helps to keep your home dry, it protects your home walls and floors from creating a seepage. It will help to prevent water damage from occurring. It also helps to reduce the humidity inside the house. It is also helps into reduce the house maintainance, because as and when painting is not required.
It is also helps into reduce the house maintainance, because as and when painting is not required. It increases the house value which is the biggest advantage, it prevent from the water seepage of the walls & it avoid the unwanted moisture.
Basically, for waterproofing Polyurethane is considered as one of the best material.Cementitious coating is a powder of mix of sand & organic. EPDM Rubber, Rubberized Asphalt usually it is used for commercial building. Thermoplastic it has the logest lifespan. Bituminous membrane, and PVC waterproofing Membrance.
Firstly, will remove everything with all layers with a strong wired brush & with a heavy pressure wash if required. Waterproofing coating 1 layer, 2 layers, 3 layers as per requirement and product procedure after that fresh painting process Putty, Primer and Paint
Waterproofing is done in two ways, firstly, concrete is prepared by mixing chemical waterproofing material like Dr.Fixit LW, Asian Paints, Nerloac Parma, Choksi, Durabuild with cement while building a house and secondly, waterproofing fluid is used to fill cracks in the roof and walls of old building.
Dr. Fixit New coat, Dr. Fixit Raincoat, Forsoc Brushbond RFX, Smartcare Damp Proof, Smartcare Damp Block , Dr.Fixit LW, Asian Paints, Nerloac Parma, Choksi.
During the construction of a new house, cracks are left due to masonry errors in plastered areas like walls, and ceilings.These cracks later cause moisture to seep into the roof, wall joints, or ceiling surface of the house. Waterproofing steps for damanged wall and ceiling before repainting, terrace, concrete surface of the house, during construction work.
Yes surely, it required putty and paint after waterproofing procedure. Wall putty increases the life span of the house walls, provides a smoother finish, and it prevent seepage in the wall cracks. It is resistant to moisture and can be a base coat for waterproofing as well.
Generally, charges depends on the various factors like area of house waterproofing, layers of waterproofing, product of the waterproofing.